Tilta has announced their first major upgrade to the Hydra Arm Mini with a new Modification Kit to allow compatibility with the DJI Ronin 2 Gimbal Body. The Tilta Modification Kit includes a heavier-duty shock-absorbing head, 2 smaller support cables, a mount adapter for the DJI Ronin 2, and a stronger spring for the shock-absorbing arm. These four new components boost the Hydra Arm Mini’s payload capacity, supporting loads ranging from 8kg/17.6lbs to 13kg/28.6lbs in a two-arm configuration – good news for heavier camera/lens combinations. In addition, Tilta’s Modification Kit should eliminate high-frequency vibrations and allow for smoother footage, particularly at higher speeds.Shock absorbing headTo provide stronger shock absorption for the heavier camera/lens combinations, Tilta replaced the original polyurethane material in the shock-absorbing head with steel wire. The steel wire absorbs vibration, so high-frequency vibrations are eliminated, providing stable gimbal performance. The Head is easily swapped with the original using a quick-release plate.Shock-absorbing head with steel wire. Source: TiltaMount adapter for DJI Ronin 2The kit’s mount adapter was specially designed for the DJI Ronin 2 to easily integrate into the Hydra Arm Mini system. According to Tilta, users can quickly and securely mount the gimbal to the head without requiring any additional mounting accessories. Adapter specially designed for the DJI Ronin 2. Source: TiltaStronger shock absorbing springThe limited payload capacity of the system’s original spring has now been addressed with an upgraded, heavy-duty spring for the shock-absorbing arm. By replacing the original spring, the Hydra Arm can support loads ranging from 8kg/17.6lbs to 13kg/28.6lbs in a two-arm configuration. Heavy-duty spring can support higher payloads. Source: TiltaSmaller support cablesThe shortened support cables let users build the arm with only two pieces. This means it won’t reach as far, but, being more flexible, it has an advantage in tight spaces or tricky environments. Shortened support cables. Source: TiltaPlease note that to properly support the Ronin 2 with the higher payload capacity, you’ll need to use this two-arm setup. Tilta DJI Ronin 2 Modification Kit installationTilta has put together a very thorough, easy-to-follow video that shows you in detail all the installation ins and outs. The Modification Kit components. Source: TiltaCheck out Tilta’s video below to see how the modification kit is set up:Price and availabilityThe Tilta DJI Ronin 2 Modification Kit can be pre-ordered directly on the Tilta website and is priced at $659. Delivery time is estimated between 2-4 weeks with free shipping. Do you work with a DJI Ronin 2, and is the Tilta Modification Kit a game-changer for you? Let us know in the comments below!
